PLEASE NOTE THAT THIS IS A SPECIAL ORDER ITEM - SHIPPING 1 WEEK

23227 REESE  600 lbs. (shows 550lb)Trunnion Weight Distribution Replacement Spring Bar  $78.29 (each)

600 POUND Replacement Spring Bar

26002 REESE Dual Cam High-Performance Sway Control $211.29 free shipping

DUAL CAM SWAY CONTROL IS FULLY AUTOMATIC AND SELF-CENTERING, HOOKING UP THE SPRING BARS AUTOMATICALLY HOOKS UP THE SWAY CONTROL, PATENTED CAM DESIGN AUTOMATICALLY "LEANS" YOU INTO TURNS. free shipping with this unit

Bolt On High Performance Dual Cam Sway Control by Draw-Tite and Reese

• Prevents and corrects trailer sway
  • Utilizes a patented cam design
• Self-adjusting - fully automatic and self-centering
• Attaches directly to round or trunnion spring bars with cam at the end of the bar
• Bolts-on for easy installation
  • Width of frame cannot exceed 2-1/2"
• Mounting system will not interfere with gas bottles or other components mounted on the trailer
• Kit includes gold sway bars and frame brackets with hardware
  • Weight distribution system (spring bars, chain and uplift brackets) sold separately

Note: REESE recommends that this product be used only with the weight distribution spring bars that have the integrated cam on them (these bars curve down where they connect to the chain). Use of the straight spring bars with the cam adapter is not recommended.

Unlike the friction sway control, the dual cam approach works to control sway from the start rather than just resisting sway once it has begun. When towing in a straight line, the cams on either side of the trailer A-frame are locked in position. This essentially creates a "rigid" connection between tow vehicle and trailer and minimizes the effects of induced sway caused by high cross-winds or passing vehicles.

Even on sharp curves, the cams usually ride in a locked position. However, when cornering maneuvers are required, the cams automatically slide out of their locked position to permit full radius turns. When the maneuver is short and abrupt, like that encountered in the event of a sudden swerve, the cams seek a straight-line towing angle that helps the tow vehicle retain control.

The biggest advantage of the dual cam system is its ability to prevent sway in addition to providing resistance against it. The dual cams work to hold down the start of swaying activity while at the same time allowing free and easy vehicle and trailer interaction. Because the dual cams are installed on the trailer, the system does not require adjustment every time the tow vehicle and the trialer are hooked up, unless the hitch weight or tow vehicle loading change.

Weight Distribution is sold separately.

54970 Wt.-Dist. Shank

PLEASE NOTE THAT THIS IS A SPECIAL ORDER ITEM - SHIPPING 1 WEEK

58113 REESE  600 lbs. (shows 550lb) Round Bar Weight Distribution Replacement Spring Bar  $78.29 600 POUND Replacement Spring Bar

PLEASE NOTE THAT THIS IS A SPECIAL ORDER ITEM - SHIPPING 1-2 WEEKS REQUIRED

66072 REESE Strait-Line 600 lbs. Trunnion Bar Hitch  $519.29 free shipping  PREMIUM CLASS, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, DOES NOT include Weight Distribution Shank 99-1427 - FREE SHIPPING

Strait-Line Hitch 600 is a combination of the Reese trunnion style weight distribution system (66072) and the new Dual Cam High-Performance Sway Control (26002).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• Designed for Tongue Weights Between 200 - 600 lbs / Maximum Trailer Weight 12,000 lbs
• Simple installation and adjustment
• Fully automatic and self-centering
• Hooking up spring bars automatically hooks up sway control
• Reduced Noise
• No U-bolts to conflict with bottle racks or other A-frame mounted items
• Specific attachment reference points provided
• Will fit trailer frames up to 2-1/4" wide
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.
•  

66073 REESE Strait-Line 800 lbs. Trunnion Bar Hitch  $519.29 free shipping

  PREMIUM CLASS, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, DOES not include Weight Distribution Shank 99-1427 - FREE SHIPPING

Strait-Line Hitch 800 is a combination of the Reese trunnion style weight distribution system (66021) and the new Dual Cam High-Performance Sway Control (26002).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• High Performance Weight Distribtuion (# 66021) - designed for tongue weights between 400 - 800 lbs / Maximum Trailer Weight 12,000 lbs
  • Simple installation and adjustment with serrated washers on weight distribution head
  • Snap-up chain brackets fit channel trailer frames up to 2-1/4" wide
• Dual cam sway control (# 26002) is fully automatic and self-centering
  • Hooking up spring bars automatically hooks up sway control
  • No U-bolts to conflict with bottle racks or other A-frame mounted items
• Reduced Noise
• Specific attachment reference points provided
• Will fit trailer frames up to 2-1/4" wide
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

66074 REESE Strait-Line 1200 lbs. Trunnion Bar Hitch  $519.29 free shipping

  PREMIUM CLASS, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, DOES NOT INCLUDE Weight Distribution Shank 99-1427 - FREE SHIPPING

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit. The Strait-Line Hitch name comes from its pro-active design literally forcing the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

Strait-Line Hitch 1200 is a combination of the Reese trunnion style weight distribution system (66022) and the Dual Cam High-Performance Sway Control (26002).

• High Performance Weight Distribtuion (# 66022) - designed for tongue weights between 600 - 1,200 lbs / Maximum Trailer Weight 12,000 lbs
  • Simple installation and adjustment with serrated washers on weight distribution head
• Dual cam sway control (# 26002) is fully automatic and self-centering
  • Hooking up spring bars automatically hooks up sway control
  • No U-bolts to conflict with bottle racks or other A-frame mounted items
• Reduced Noise
• Specific attachment reference points provided
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

66075 REESE Strait-Line 1700 lbs. Trunnion Bar Hitch  $672.29 free shipping (SPECIAL LIMITED TIME OFFER subject to change without notice)

  PREMIUM CLASS, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, (THIS UNIT DOES NOT INCLUDE HITCH BAR SOLD SEPARATELY)  - FREE SHIPPING

Strait-Line Hitch 1700 is a combination of the Reese trunnion-style-weight distribution system for Titan (2-1/2" square) receivers (66006) and the new Dual Cam High-Performance Sway Control (26002).

The Strait-Line Hitch was given this name because its proactive design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distribution with the best, proved, proactive sway-control system available in a newly designed, easy-to-install kit.

• 66006 Square Receiver- designed for tongue weights 1,000lbs - 1,700lbs / Maximum trailer weight 17,000 lbs
• Simple installation and adjustment
• Fully automatic and self-centering
• Sway control automatically hooks up when spring bars are hooked up.
• Reduced noise
• No U-bolts to conflict with bottle racks or other A-frame-mounted items
• Specific attachment reference points provided
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

PLEASE NOTE THAT THIS IS A SPECIAL ORDER ITEM - SHIPPING 1-2 WEEKS

66076 REESE Strait-Line 600 lbs. Round Bar Weight Distribution Hitch  $397.29 FREE SHIPPING 600 POUND TONGUE WEIGHT CAPACITY   PREMIUM CLASS HITCH IN DETAIL AND DESIGN, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, - SIMPLY THE BEST and FREE SHIPPING!

Strait-Line Hitch 600 is a combination of the Reese Heavy Duty Round Bar style weight distribution system (66067), the new Dual Cam High-Performance Sway Control (26002 and the 63970 hitch bar).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• Maximum Tongue Weight 600 lbs. / Maximum Trailer Weight 6,000 lbs.
• Simple installation and adjustment
• Fully automatic and self-centering
• Hooking up spring bars automatically hooks up sway control
• Reduced Noise
• No U-bolts to conflict with bottle racks or other A-frame mounted items
• Specific attachment reference points provided
•  
• Note: Trailer Hitch Ball  weight distributing shank (99-1427) sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

66077 REESE Strait-Line 800 lbs. Round Bar Weight Distribution Hitch  $397.29 FREE SHIPPING 800 POUND TONGUE WEIGHT CAPACITY   PREMIUM CLASS HITCH IN DETAIL AND DESIGN, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, - SIMPLY THE BEST and FREE SHIPPING!

Strait-Line Hitch 800 is a combination of the Reese Heavy Duty Round Bar style weight distribution system (66066), the new Dual Cam High-Performance Sway Control (26002).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• 66066 - Maximum Tongue Weight 800 lbs. / Maximum Trailer Weight 10,000 lbs.
• Simple installation and adjustment
• Fully automatic and self-centering
• Hooking up spring bars automatically hooks up sway control
• Reduced Noise
• No U-bolts to conflict with bottle racks or other A-frame mounted items
• Specific attachment reference points provided
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

PLEASE NOTE: BECAUSE OF THE POPULARITY OF THIS PARTICULAR UNIT IT IS CURRENTLY A "SPECIAL ORDER" ITEM THAT TAKES A WEEK LONGER TO SHIP.

PLEASE NOTE THIS IS A SPECIAL ORDER ITEM - SHIPPING 1-2 WEEKS

66078 REESE Strait-Line 1200 lbs. Round Bar Weight Distribution Hitch  $417.29 FREE SHIPPING 1200 POUND TONGUE WEIGHT CAPACITY   PREMIUM CLASS HITCH IN DETAIL AND DESIGN, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, - SIMPLY THE BEST and FREE SHIPPING!

Straight-Line Hitch 1200 is a combination of the Reese Heavy Duty Round Bar style weight distribution system (66066), the new Dual Cam High-Performance Sway Control (26002).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• 66067 - Tongue Weight 600-1,200 lbs. / Maximum Trailer Weight 12,000 lbs.
• Simple installation and adjustment
• Fully automatic and self-centering
• Hooking up spring bars automatically hooks up sway control
• Reduced Noise
• No U-bolts to conflict with bottle racks or other A-frame mounted items
• Specific attachment reference points provided
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

66082 REESE Strait-Line 600 lbs. Trunnion Bar Hitch INCLUDES HITCH BAR (includes 54970 13"  shank) $556.29 free shipping  PREMIUM CLASS, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, includes Weight Distribution Shank 54970 99-1427 - FREE SHIPPING

66083 REESE Strait-Line 800 lbs. Trunnion Bar Hitch INCLUDES HITCH BAR 54970 $556.29 free shipping  PREMIUM CLASS, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, includes Weight Distribution Shank 54970 - FREE SHIPPING

PLEASE NOTE THAT THIS IS A SPECIAL ORDER ITEM - SHIPPING 1-2 WEEKS

66086 REESE Strait-Line 600 lbs. Round Bar Weight Distribution Hitch  INCLUDES HITCH BAR 54970 $494.29 FREE SHIPPING 600 POUND TONGUE WEIGHT CAPACITY   PREMIUM CLASS HITCH IN DETAIL AND DESIGN, This is the ultimate design, provides the best driver control, has the Draw-Tite patented Dual Cam High-Performance Sway Control and High-Performance Weight Distributing System, simple installation, fully automatic and self-centering, includes Weight Distribution Shank 54970 - SIMPLY THE BEST and FREE SHIPPING!

Strait-Line Hitch 600 is a combination of the Reese Heavy Duty Round Bar style weight distribution system (66065), the new Dual Cam High-Performance Sway Control (26002 and the 63970 hitch bar).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• 66065 - Maximum Tongue Weight 600 lbs. / Maximum Trailer Weight 10,000 lbs.
• Simple installation and adjustment
• Fully automatic and self-centering
• Hooking up spring bars automatically hooks up sway control
• Reduced Noise
• No U-bolts to conflict with bottle racks or other A-frame mounted items
• Specific attachment reference points provided
• Includes weight distributing shank
  • Provides a 1-1/4" drop or 6" rise
  • Measures 13" long from the center of the hitch pin hole to the center of the ball hole
• Note: Trailer Hitch Ball is sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.