90185 Tekonsha PRODIGY 2 BRAKE CONTROL for 1 to 4 axles WITH PRODIGY NO MANUAL LEVEL ADJUSTMENT IS NECESSARY, IT ADJUSTS ITSELF TO VARYING TERRAINS AS YOU DRIVE. a digital display depicts voltage delivery to the trailer during braking and displays continual diagnostics check for proper connection, includes a 3 ft. pigtail connector PLUG & PLAY FOR EASE OF CONNECTION
Tekonsha introduces PRODIGY one of the most advanced and intelligent approaches to trailer brake controls. PRODIGY requiring no manual leveling, is a technological breakthrough among inertia-activated brake controls. Equipped with a self-adjusting sensing device similar to the one used in guided-missile technology to allow for easy, flexible installation - from nearly horizontal to nearly vertical - the Tekonsha PRODIGY constantly adjusts itself to the position of the tow vehicle.
Features:
- Applies power to the trailer brakes in proportion to vehicle's deceleration.
- No level adjustment necessary - it adjusts itself to varying terrain as you drive.
- Works proportionally in reverse - great for backing into tough spots.
- Digital display depicts voltage delivery to trailer during braking.
- Continual diagnostics check for proper connection, shorted magnet condition and much more.
- "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers.
- Power-saving mode reduces drain on battery when vehicle is not in use.
- Unique pocket mount allows for flexible mounting options.
- The Prodigy, along with the Tekonsha Primus, offers a replacement pocket and wiring harness (sold separately) to move the controller easily from one vehicle to another
- Quick and easy disconnect feature allows user to remove and store the control when not in use.
- Rotary manual brake adjustment lever
- Limited lifetime warranty
Specs:
- Dimensions: 3-1/8" (W) x 5-1/8" (L) x 1-3/16" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
- Can be mounted between 0 degrees (level) and 70 degrees
- Boost levels increase power up 0%, 13% and 25%
- Power saving sleep mode draws 3.6 milliamp
- Included pigtail wiring harness measures about 34" long
- Version 2.6
Required: For vehicles without brake control adapters.
20 amp. Circuit Breaker (9506P) for 2-4 Brake applications
30 amp. Circuit Breaker (38630) for 6-8 Brake applications
